KEVIN L
yes if was was wanting to replace my pioneer after market cp player to a in dash flip screen dvd touch screen is there anything extra that i need that i dont already have i would keep the same wire harnest? can someone just expain if its the same setup as a cd player thanks alot kevin
and i have a 2ch amp and a 4ch amp do most dvd players have enough outputs thanks
Answer
You will need to cut off the Pioneer harness from the vehicle specific harness (you will understand once you pull out the radio) and then connect the new DVD players wires to the vehicle specific harness. Follow the color codes and match the wires up.
Everything is exactly the same with one minor add on for the DVD player - It most likely has a wire that is meant to connect to the parking brake wire.
This wire is designed to prevent you from watching the DVD player while the vehicle is in motion.
I recommend you do not watch things while driving because it is dangerous and illegal in most states.
But if you really want to do it, just connect that parking brake wire to the ground wire (Black) and it should work fine moving or not.
Brad
You will need to cut off the Pioneer harness from the vehicle specific harness (you will understand once you pull out the radio) and then connect the new DVD players wires to the vehicle specific harness. Follow the color codes and match the wires up.
Everything is exactly the same with one minor add on for the DVD player - It most likely has a wire that is meant to connect to the parking brake wire.
This wire is designed to prevent you from watching the DVD player while the vehicle is in motion.
I recommend you do not watch things while driving because it is dangerous and illegal in most states.
But if you really want to do it, just connect that parking brake wire to the ground wire (Black) and it should work fine moving or not.
Brad
in dash dvd player help?
Q. i bought a in dash dvd player for my 07 accord and i hooked it all up fine except for one thing the parking brake wire. im not sure what wire to hook it up to on the car can any one help?
yea i know some of the new players have that but i dont really care if it doesnt work while i drive because im not gona be watching it while i drive i just cant find the parking brake wire
yea i know some of the new players have that but i dont really care if it doesnt work while i drive because im not gona be watching it while i drive i just cant find the parking brake wire
Answer
if it is jensen this will work.The code is a permanent way of disabling the brake override on the jensen units.
There are two ways of doing this:
Insert the DVD
After the disc loads and plays you will see a blue screen telling you "it is unlawful to drive with a movie blah blah blah"
1)Activate the brake sequence and disable the blue screen using the hand brake, the switch method or anything else to give the unit its three pulses to disable that freakin blue screen.
(What I did was I installed my radio entirely, then took the pink wire and touched for two seconds, removed for two seconds and then touched and held the negative pole of a mower battery laying on my passenger seat until the screen was no longer blue.)
2) Next, on the main remote press stop twice, then 1, 2, 6, 4.
You will now see a hidden menu that says:
Region Code
Brake Override (I know you're drooling by now)
Macrovision (Watch all the burned and pirated movies you want if this option is off)
Loader Version
Model Version
3) Using the right joystick on the unit, navigate to the options of your choice, click on them to toggle on, off or which region code you want.
This is what you want:
Region Code: 1
Brake Override ON
Macrovision: OFF
When your done, click SYS SETUP on the main remote TWICE to save the settings and bingo, your done!!! Hooray!!! You can now kill your whole family in the car while watching that adult movie while your driving.....
The other way of doing this is by not engaging the parking brake sequence, thus you're inputting the code blindly.
1) Insert the DVD and you'll get the blue screen.
(If you have more than one tv, the unit itself will have the blue screen but the additional tv's you have plugged in will NOT, they will show the dvd menu. Thus you will be able to see the hidden menu on the additional screens after inputting the code, but not on the main unit because of its blue screen.)
2) On the main remote, push stop twice and then 1, 2, 6, 4
3) Push the joystick on the unit SOUTH twice and then click it once.
4) Press SYS SETUP on the main remote twice to save your settings.
It may take a few tries but you'll get it. This method can be done if you don't want to bother temporarily activating the brake sequence, but if you only have the unit and no additional tv's, its #$%^&* damn hardbecause you can't see the settings your changing.
I tried to make this as clear as possible. If you have questions, private message me or post here.
This code DOES work.
Best of Luck!
if it is jensen this will work.The code is a permanent way of disabling the brake override on the jensen units.
There are two ways of doing this:
Insert the DVD
After the disc loads and plays you will see a blue screen telling you "it is unlawful to drive with a movie blah blah blah"
1)Activate the brake sequence and disable the blue screen using the hand brake, the switch method or anything else to give the unit its three pulses to disable that freakin blue screen.
(What I did was I installed my radio entirely, then took the pink wire and touched for two seconds, removed for two seconds and then touched and held the negative pole of a mower battery laying on my passenger seat until the screen was no longer blue.)
2) Next, on the main remote press stop twice, then 1, 2, 6, 4.
You will now see a hidden menu that says:
Region Code
Brake Override (I know you're drooling by now)
Macrovision (Watch all the burned and pirated movies you want if this option is off)
Loader Version
Model Version
3) Using the right joystick on the unit, navigate to the options of your choice, click on them to toggle on, off or which region code you want.
This is what you want:
Region Code: 1
Brake Override ON
Macrovision: OFF
When your done, click SYS SETUP on the main remote TWICE to save the settings and bingo, your done!!! Hooray!!! You can now kill your whole family in the car while watching that adult movie while your driving.....
The other way of doing this is by not engaging the parking brake sequence, thus you're inputting the code blindly.
1) Insert the DVD and you'll get the blue screen.
(If you have more than one tv, the unit itself will have the blue screen but the additional tv's you have plugged in will NOT, they will show the dvd menu. Thus you will be able to see the hidden menu on the additional screens after inputting the code, but not on the main unit because of its blue screen.)
2) On the main remote, push stop twice and then 1, 2, 6, 4
3) Push the joystick on the unit SOUTH twice and then click it once.
4) Press SYS SETUP on the main remote twice to save your settings.
It may take a few tries but you'll get it. This method can be done if you don't want to bother temporarily activating the brake sequence, but if you only have the unit and no additional tv's, its #$%^&* damn hardbecause you can't see the settings your changing.
I tried to make this as clear as possible. If you have questions, private message me or post here.
This code DOES work.
Best of Luck!
Powered by Yahoo! Answers
Title Post: in dash dvd player install just like a cd player?
Rating: 100% based on 9998 ratings. 5 user reviews.
Author: Unknown
Thanks For Coming To My Blog
Rating: 100% based on 9998 ratings. 5 user reviews.
Author: Unknown
Thanks For Coming To My Blog
Tidak ada komentar:
Posting Komentar