Tampilkan postingan dengan label best upscaling dvd player 1080p. Tampilkan semua postingan
Tampilkan postingan dengan label best upscaling dvd player 1080p. Tampilkan semua postingan

Senin, 31 Maret 2014

Are there any coupon codes for Pioneer DV-410V Multi-Format 1080p Upscaling DVD Player...?




counterexa


...Featuring HDMI
Where can I find a coupon code for Pioneer DV-410V Multi-Format 1080p Upscaling DVD Player Featuring HDMI



Answer
I purchased Pioneer DV-410V dvd player to replace a low-end Sony model that I have been using for a year. The Sony DVD player does not have a HDMI port, so I have been relegated to watching my Panasonic LCD TV via component video cable. I narrowed my choice between Pioneer and LG DN898 players. They are the two top rated DVD players according to Consumer Reports. Pioneer, with the score of 86, tops LG player (which gets 82). I saw no reviews for LG DN898 on the Amazon web site; Pioneer (Amazon's second bestselling upconverting DVD player; LG was #7) got 15 mostly positive reviews. So I went for the Pioneer player.

Pioneer DV-410V has a very handsome form factor. There are more controls in the front panel of the player than most other DVD players (even though I probably would not use any of them). Disc tray is very solidly made. The display is easy to read. Pioneer comes with plenty of connection options. Composite A/V, S-video, component video, HDMI, plus coaxial digial audio out. The notable omission is the optical digital output (fortunately I do not need it), which is available in Pioneer's higher-end models. The set up was very easy. Connect the HDMI cable, went through various settings in the Home Menu, and I was ready to watch my first DVD.

The Home Menu is a model of efficiency. It is divided into five major sections: Audio Settings, Video Adjust, Play Mode, Disk Navigator, and Initial Settings. It is very easy to navigate through each section using cursor buttons. I especially like the Video Adjust Menu, which give you control over such settings as Sharpness, Brightness, Contrast, Gamma, Hue, and Chroma Level. This may be redundant with many TVs, but my Panasonic LCD display has minimal picture settings, so some of those settings are still useful.

The picture quality is much better than what I have been used to with the Sony, at least due to using HDMI instead of component video cable. The picture is more lively and rich than what I have been used to. The picture quality difference was most evident when viewing JPEG photo files. They were like viewing them on my computer display, except on very large scale. I gave up watching JPEG files with the Sony because the images were so pixelated and the resolution was so terrible.

Audio was very rich and clear, although this only happened when I disabled surround and other special audio features. Sometimes less is more. Too many special settings actually have opposite effect. The player remembers last five discs, and it resumes the play automatically. When I stop a DVD and then press play there is no delay; on my old Sony there was a considerable delay

So why only four stars. Any man-made product has at least a bit of imperfection, so this DVD player is no exception. My major gripe is that Pioneer is noisy. It is not a problem when I am watching a DVD, but when I first turn on the unit or when I pause or stop the noise level is perceptible. Next, the display in front of the unit is fixed at displaying chapter and elapsed time (for DVDs). I rather have the flexibility to change it to the remaining time, which is more useful to me. I can view the remaining time and other informations by pressing Display button on the remote (and I have to press the button two more times to get rid of the onscreen display), but that's not as convenient as just looking at the unit's display. Time format is in minutes and seconds, so 1 hour 25 minutes will show up as 85:00, instead of 01:25:00 which I am accustomed to viewing. The remote control is not a universal remote, so I cannot control my TV with it. It does not even have volume or mute buttons. This is no problem for me because I use Sony RM-VL600 8-Device Universal Learning Remote, which I would recommend very highly. Lastly, it only comes in black, if anyone cares.

$149.95 + $13.93 shipping
In Stock. Ships from and sold by DiscountJungle
DiscountJungle
Feedback Rating:
4.8 stars over the past 12 months (15986 ratings)

Where can I get the best deal for Sony DVP-NS710H B 1080p Upscaling DVD Player?




unwonted


Where can I find a really good deal online for Sony DVP-NS710H B 1080p Upscaling DVD Player


Answer
DVP-NS710H/B Sony DVD Player with 1080p Upscaling and HDMI
Regular price: $79.00
Sale price: $64.00
You Save: $15.00

Make movie night more enjoyable and watch your DVDs in striking 1080p HD resolution with this upscaling DVD player.

Breathe new life into your DVD collection. The DVP-NS710H/B DVD player upscales your existing DVD collection to gorgeous 1080p HD resolution via an HDMI⢠connection. This DVD player is also equipped with BRAVIA® Sync⢠which gives you one-remote access and control of your DVD player and other BRAVIA Sync-compatible devices. In addition to exceeding ENERGY STAR® compliance levels, you'll also enjoy uncompromised audio quality with Dolby® and dts® digital outputs, as well as an analog audio two-channel output. You can even view photos and listen to music in a wide variety of formats. Includes A/V cable and remote control with batteries.

# Features DVD upscale to 1080p near HD resolution via HDMI⢠- 1080p upscaling DVD player via HDMI⢠connection: DVD upscaling via HDMI⢠makes your existing standard DVDs look better on your HDTV by upscaling them to 1080p near HD Resolution.

# BRAVIA® Sync - BRAVIA Sync capability combines the one-touch access and control functionality of BRAVIA Sync⢠with the ability to control BRAVIA Sync-compatible devices, such as Sony HDTVs and receivers.

# Exceeds ENERGY STAR® standards - Many home audio and video devices can use significant power, even when turned off and in standby mode. The DVP-NS710H, however, was built for energy efficiency. It uses under 0.1W of power in standby mode, far exceeding ENERGY STAR® compliance levels and using less power than most other DVD players.

# Multi-brand TV remote control - Switching back and forth between remote controls while watching television or a movie is a hassle. The DVP-NS710H comes with a compact remote control that allows you to operate most major brands of television and your DVD player.

# Multiple format disc playback - The DVP-NS710H isn't just for movies. You can enjoy movies, as well as photos and music, in a wide variety of formats. The player supports DVD/DVD-RW/DVD-R/DVD+RW/DVD+R DL and CD-R/CD-RW discs runs WMA, AAC, LPCM, MPEG1 (Cyber-shot® movie), and JPEG files.

# Precision Cinema Progressive⢠technology - Many other DVD players detect image changes at the scan line level; the Sony® Precision Cinema Progressive system, however, detects image changes at the pixel level. The picture is more faithful to the source -- whether film or video -- because special algorithms handle the different pixel behavior. The technology also employs separate algorithms to process the moving and still parts of an image, resulting in sharp backgrounds with moving objects that are virtually free from artifacts.

# Precision Drive⢠3 system - Past generations of Precision Drive were only able to compensate for warped discs by moving the entire optical block, which took more time and limited the amount of correction possible. Sony® Precision Drive 3 simplifies the process by moving the lens -- instead of the entire optical block -- for faster and more accurate error correction.

# Photo TV HD - Bring your photos to life and enjoy highly detailed, Full HD 1920 x 1080p images with the PhotoTV HD mode. PhotoTV HD works with your DVD player and HDMI⢠output to fine tune sharpness, gradation, and color, displaying images that more closely match the look of printed photos.

# Fast/slow playback with sound - Fast and slow playback with sound lets you advance through scenes quickly and ensures you never miss a word.

# Multiple-disc resume - With multiple-disc resume, you can power up and return to the last scene you were watching on up to six discs without having to search. Start and stop a movie or switch DVDs -- the player will know exactly where you last left off.

# Dolby® digital output; dts® coaxial digital output - The DVP-NS710H includes support for enhanced audio formats from Dolby and dts and provides connectivity to older receivers and televisions, making the player compatible with many existing audio systems. Also included is an analog audio two-channel output.

# Child lock (tray lock): - A child lock feature prevents children from opening the DVD player's tray and either removing a DVD or playing a different DVD while the parent is away.

Inputs/Outputs
# Coaxial Audio Digital Output(s) : 1 (Rear)
# Component Video (Y/Pb/Pr) Output(s) : 1 (Rear)
# Composite Video Output(s) : 1 (Rear)
# HDMI⢠Connection Output(s) : 1 (Rear)
# RCA Audio Output(s) : 1 (Rear)
# S-Video Output(s) : 1 (Rear)




Powered by Yahoo! Answers

Sabtu, 29 Maret 2014

Blu-ray player or upscaling DVD player for DVDs with 1080p HDTV?

Q. Are there any differences in image quality between an upscaling Blu-ray player and an upscaling DVD player when DVDs are viewed on a 1080p HDTV?

I'm mainly pondering if I should grab Panasonic DVD-HTIB SC-PT480, or Panasonic Blu-ray-HTIB SC-BT230. The price difference here is about $200 ($250 vs. $450). I know there are other considerations, such as possible price parity of movie releases on both systems in the future, which would make buying Blu-ray movies more attractive option, but for the purposes of this question, I'm mainly interested if the results are identical on DVD upscaling.


Answer
No - the results are NOT the same.

Look - The video on a DVD was frozen in 1948 when the TV was imagined as a nine-inch tube in black and white. We have been stuck with this video for 70 years while nearly everything else around it went through generations of advancements.

Up-converting needs to do 3 different things to the video. Most up-converting DVD players cheap out and do one or two and poorly. (The Oppo DVD players are the exception) But in no-way-shape-or-form can it put information into the picture that is not already there.

Your TV already up-converts things. To see the effect, try this:

* Watch a major show tonight on an HD channel.
* Mid way through the show, switch to the standard-def version of the channel

The standard-def channel will already be up-converted by the TV. How good does it look?

(Hint: get the BluRay player. Unlike many of it's brethren, it has 2 spare optical inputs to let you hook other things up to it.)

Where can I get the best deal for Pioneer DV-410V-K Multi-Format 1080p Upscaling DVD Player...?




uptrend


...Featuring HDMI
Where can I find a really good deal online for Pioneer DV-410V-K Multi-Format 1080p Upscaling DVD Player Featuring HDMI



Answer
$99.96
+ $7.49shipping

New


*
Seller: Transformersandgsmphones
*
Rating:86% positive over the past 12 months (7 ratings.) 7 lifetime ratings.
*
Shipping: In Stock. Expedited shipping available. See Shipping Rates. See return policy.
echnical Details

* HDMI Terminal for Digital Audio/Video Out
* HDMI Upscaling (to View on 1080p) WMV (Windows Media¿¿¿ Video) Compatible
* HD JPEG Playback JPEG PhotoViewer (Fujicolor CD) Video Adjust Func
* PureCinema 2:3 Progressive Scan
* 1 HDMI Terminal ,1 USB Input, 1 Coaxial Digital Output, 1 S-Video Output, 1 Audio/1 Video Output, Component Video Output (DVD, Video CD)


# Product Dimensions: 8.4 x 16.6 x 1.9 inches ; 4.2 pounds
# Shipping Weight: 6 pounds (View shipping rates and policies)
# Shipping: This item can only be shipped to the 48 contiguous states. We regret it cannot be shipped to APO/FPO, Hawaii, Alaska, or Puerto Rico.
# Note: Gift-wrapping is not available for this item.
# ASIN: B0014UOJM0
# Item model number: DV-410V-K

I purchased Pioneer DV-410V dvd player to replace a low-end Sony model that I have been using for a year. The Sony DVD player does not have a HDMI port, so I have been relegated to watching my Panasonic LCD TV via component video cable. I narrowed my choice between Pioneer and LG DN898 players. They are the two top rated DVD players according to Consumer Reports. Pioneer, with the score of 86, tops LG player (which gets 82). I saw no reviews for LG DN898 on the Amazon web site; Pioneer (Amazon's second bestselling upconverting DVD player; LG was #7) got 15 mostly positive reviews. So I went for the Pioneer player.

Pioneer DV-410V has a very handsome form factor. There are more controls in the front panel of the player than most other DVD players (even though I probably would not use any of them). Disc tray is very solidly made. The display is easy to read. Pioneer comes with plenty of connection options. Composite A/V, S-video, component video, HDMI, plus coaxial digial audio out. The notable omission is the optical digital output (fortunately I do not need it), which is available in Pioneer's higher-end models. The set up was very easy. Connect the HDMI cable, went through various settings in the Home Menu, and I was ready to watch my first DVD.

The Home Menu is a model of efficiency. It is divided into five major sections: Audio Settings, Video Adjust, Play Mode, Disk Navigator, and Initial Settings. It is very easy to navigate through each section using cursor buttons. I especially like the Video Adjust Menu, which give you control over such settings as Sharpness, Brightness, Contrast, Gamma, Hue, and Chroma Level. This may be redundant with many TVs, but my Panasonic LCD display has minimal picture settings, so some of those settings are still useful.

The picture quality is much better than what I have been used to with the Sony, at least due to using HDMI instead of component video cable. The picture is more lively and rich than what I have been used to. The picture quality difference was most evident when viewing JPEG photo files. They were like viewing them on my computer display, except on very large scale. I gave up watching JPEG files with the Sony because the images were so pixelated and the resolution was so terrible.

Audio was very rich and clear, although this only happened when I disabled surround and other special audio features. Sometimes less is more. Too many special settings actually have opposite effect. The player remembers last five discs, and it resumes the play automatically. When I stop a DVD and then press play there is no delay; on my old Sony there was a considerable delay

So why only four stars. Any man-made product has at least a bit of imperfection, so this DVD player is no exception. My major gripe is that Pioneer is noisy. It is not a problem when I am watching a DVD, but when I first turn on the unit or when I pause or stop the noise level is perceptible. Next, the display in front of the unit is fixed at displaying chapter and elapsed time (for DVDs). I rather have the flexibility to change it to the remaining time, which is more useful to me. I can view the remaining time and other informations by pressing Display button on the remote (and I have to press the button two more times to get rid of the onscreen display), but that's not as convenient as just looking at the unit's display. Time format is in minutes and seconds, so 1 hour 25 minutes will show up as 85:00, instead of 01:25:00 which I am accustomed to viewing. The remote control is not a universal remote, so I cannot control my TV with it. It does not even have volume or mute buttons. This is no problem for me because I use Sony RM-VL600 8-Device Universal Learning Remote, which I would recommend very highly. Lastly, it only comes in black, if anyone cares.




Powered by Yahoo! Answers

Sabtu, 11 Januari 2014

Should I return my recently purchased HD DVD player and buy a much cheaper DVD upconverter instead?

best upscaling dvd player 1080p on Foehn & Hirsch HDMI Upscaling DVD player 1080P DIVX: Amazon.co.uk ...
best upscaling dvd player 1080p image



Nick K


Is it worth the money to keep the HD DVD player? Doesn't it do the same function as an upconverter? Please correct me if I am wrong and tell me why it is so much better to have the HD DVD player.


Answer
Depends what you paid for it (and assumes you CAN return it) and what matters to you.

First, consider whether you can really benefit from HD DVD (or Blu-ray which gives identical audio and video quality). Basically you need a moderate to large HDTV .. say 40" or so and preferably 1080p. You also need to watch from a suitable distance (say, 1.5 - 3X screen size. lower number if a 1080p and higher if 720p). You also need an HDMI connection.

As an aside, I have an HD DVD player and don't find a sufficient improvement from HD disks to justify buying them, but I have kept the player for reasons that may become evident as you read on.

There are relatively few HD DVD disks (under 400, and Blu-ray is about the same), and many movies are not available on HD DVD. Disks are more expensive than DVD and previewed disks (i.e. cheap) are not (yet) available. So -- unless you shoot yourself in the foot and refuse to watch a movie unless it is in HD -- you will be watching lots of DVDs even if you have an HD disk player (either or both formats).

An HDTV will deinterlace (if required) and upscale an incoming 480i or 480p DVD video signal. However, some HDTVs don't do a very good job. Enter upscaling DVD players ... which may do a better job. But, only a good upconverting DVD player is worthwhile. Cheap models (certainly anything under at least $100-$125) just won't beat the video processing in most HDTVs (See the article at the link for a discussion).

HD DVD players (and Blu-ray) make good upconverting DVD players, and depending on what you paid it may be the most cost-effective way to improve the picture on all those DVDs you will still be watching for some time to come (years).

You can test this by comparing a DVD on your HD DVD player and on your present DVD player. Is the picture sufficiently improved on the HD DVD player to perceive a benefit?

If you can benefit from an upconverting DVD player, and the HD DVD player you have is about (or maybe slightly higher than) the price of a good upconverting (non-HD) DVD player (e.g. Oppo 981, $229) consider keeping it. It may help to consider the HD DVD player not as an HD DVD player per se, but as an upconverting DVD player that also plays HD DVDs.

So ... there are some factors to consider. Hope they help.

What is the maximum resolution and (file) formats supported by a dvd player with HDMI output?




xenos mc


If I buy a dvd player or recorder with HDMI output can it play files recorded in High Definition with .wmw or .mkv extensions or I must convert them to .avi (with Xvid or Divx encoder)?
Also I would like to know if files recorded in HD resolution (720 or 1080) can be played by a dvd player. Thanks.



Answer
Plain old DVD (the movie format - not the physical medium) is 480p. An upscaling DVD player using HDMI can stretch that to 1080p, but the picture quality won't be as good as a blu-ray disc, which is recorded in 1080p so no upscaling is required.

If your upscaling player supports other file formats, like Divx, they should definitely support 720p, but I don't know about 1080p. You'll have to check the manual for details on what formats and versions it supports specifically. In this case, the DVD is just a storage medium, so you could put 720p or 1080p video onto the DVD and have the player output it correctly - assuming it supports the file format you wrote the movie to DVD with. Again, check your manual.




Powered by Yahoo! Answers

Senin, 30 Desember 2013

I have a 46" Sony Bravia and the picture is really grainy and pixalated?

best upscaling dvd player 1080p on Philips BDP3000/05 Blu-ray Player best seller | dvd player uk region
best upscaling dvd player 1080p image



idkk


I bought a 46" Sony Bravia and at the store the quality seemed amazing but when I play a DVD with my upscaling dvd player the picture seems to be grainy...no matter what setting that I try..what can I do ?


Answer
So your picture quality depends on a few things:
1) Your TV
2) Your source material [this case your upscaling DVD player]
3) cables

You have a good TV, and the upscaling DVD player probably does 720p or 1080i, which is enough if you only have a 720p set. With 1080p it'd still probably be pretty good.

With that in mind, I believe your problem is the cables. Are you using high definition cables? You'll need either component cables or a HDMI cable. If you're using composite (yellow/red/white) or s-video, you're only getting a standard definition picture sent to your TV.

If you buy a cable, you don't have to get the super expensive ones, just check them out at some place like www.monoprice.com. You can get them for considerably cheaper there, and the quality is almost the same. With expensive in-store cables, more than 50% of the price is the markup. So those $100 cables you see get sold to employees for like $20.

What type of dvd player would work best for a tv that is already a widescreen?




fajita_chi


I am looking to buy a dvd player for my parents and they purchase d a wide screen tv so when you play dvds or watch tv it tends to stretch out the picture. Is there a dvd player that takes this into account or does it matter?


Answer
There is a common misperception that the screen should be full. Not so. While it is nice when it happens only material at the same aspect aratio (width to height ratio) as the screen you are watching will fill the screen ... everything else will have black bars on the top and bottom or the sides (unless the image is stretched or zoomed ... but that distorts or throws away some of the picture).

The director of a film chooses the aspect ratio, and it can vary from 1.33:1 to over 2.7:1 in extreme wideangle films. The most common are 1.78:1 (so called "16:9" -- the aspect ratio of "widescreen" TVs), 1.85:1 and 2.35:1, but others exist too.

See the image at the link to see how these aspect ratios relate on a constant width screen.

TVs often have a control that allows images to be zoomed or stretched to fit the screen ... as stated above this is distortion and most people, after playing with the different settings for a while, return to a straight undistorted image setting.

A widescreen TV will "fit" more programming (particularly if they subscribe to HD programming, which is in widescreen (16:9) format) than their old style TV (Which was 4:3 or 1.33:1 format) BUT they will still see black bars on some movies, particularly on DVD (Note: TV broadcast stations sometimes crop widescreen movies to "fit" the 16:9 screen ... and you can't control this, but the same movie on DVD might have bars).

So ... no, you don't need to buy a different DVD player for widescreen since the basic aspect ratio is determined by the movie, not the player. Maybe the above explanation will help you explain it to your parents.

If buying a DVD player for a 720p or 1080p HDTV, consider a $100-$125 (less expensive ones won't provide any benefit) "upscaling DVD player" (with a HDMI connector) or if you want to go full out, consider the Venture HD DVD player from Walmart ($200) ... which is really a Toshiba HD-A3 player (a good upscaler and it plays HD DVDs).

Hope this helps.




Powered by Yahoo! Answers

Jumat, 27 Desember 2013

What is the maximum resolution and (file) formats supported by a dvd player with HDMI output?

best upscaling dvd player 1080p on ... And Lowest Prices Philips DVP5982 1080p Upscaling DVD Player Today
best upscaling dvd player 1080p image



xenos mc


If I buy a dvd player or recorder with HDMI output can it play files recorded in High Definition with .wmw or .mkv extensions or I must convert them to .avi (with Xvid or Divx encoder)?
Also I would like to know if files recorded in HD resolution (720 or 1080) can be played by a dvd player. Thanks.



Answer
Plain old DVD (the movie format - not the physical medium) is 480p. An upscaling DVD player using HDMI can stretch that to 1080p, but the picture quality won't be as good as a blu-ray disc, which is recorded in 1080p so no upscaling is required.

If your upscaling player supports other file formats, like Divx, they should definitely support 720p, but I don't know about 1080p. You'll have to check the manual for details on what formats and versions it supports specifically. In this case, the DVD is just a storage medium, so you could put 720p or 1080p video onto the DVD and have the player output it correctly - assuming it supports the file format you wrote the movie to DVD with. Again, check your manual.

How should I connect a DVD player to benefit from the upconversion capabilities of my A/V/ receiver?




TR_T-Rex


I have a Denon AVR-988 A/V receiver that has a Faroudja FLi2310 processor which takes care of the upconversion and/or upscaling.

I also have a Samsung DVD player that has an HDMI port and which upscales upto 1080p.

On the other hand, as far as I know, my TV also does upscaling and/or upconverting (whatever)

Considering the fame of Faroudja video processing and to benefit from such processing, what should I do to bypass my TV's and DVD player's upscaling and let the Denon do the job?

If I connect the DVD player via HDMI to the A/V receiver and then connect the A/V receiver to the TV, which will do the job? If you say that the A/V receiver is going to do the job, then how am I going to know it? Is there a way that I can understand it?

I hope such connection will suffice and I will not deal with the hassle of other type of cables. I am a newbie and really like the concept of HDMI--single cable transferring both video and audio. Cool.



Answer
Honestly, you probably won't notice much, if any difference in the upscaling from your dvd player and your Denon. You can run your dvd player through your receiver and toggle the "upscale/pass through" option in your denon to see if you can notice a difference. I have a Denon 3808ci and a PS3 and I have the Denon set to pass the signal through and let the PS3 handle all of the scaling. Give it a try and see which way you like it better.




Powered by Yahoo! Answers

Selasa, 17 Desember 2013

Should I return my recently purchased HD DVD player and buy a much cheaper DVD upconverter instead?

best upscaling dvd player 1080p on Curtis 1080p HDMI Upscaling All Region Code Free PAL/NTSC DVD Player ...
best upscaling dvd player 1080p image



Nick K


Is it worth the money to keep the HD DVD player? Doesn't it do the same function as an upconverter? Please correct me if I am wrong and tell me why it is so much better to have the HD DVD player.


Answer
Depends what you paid for it (and assumes you CAN return it) and what matters to you.

First, consider whether you can really benefit from HD DVD (or Blu-ray which gives identical audio and video quality). Basically you need a moderate to large HDTV .. say 40" or so and preferably 1080p. You also need to watch from a suitable distance (say, 1.5 - 3X screen size. lower number if a 1080p and higher if 720p). You also need an HDMI connection.

As an aside, I have an HD DVD player and don't find a sufficient improvement from HD disks to justify buying them, but I have kept the player for reasons that may become evident as you read on.

There are relatively few HD DVD disks (under 400, and Blu-ray is about the same), and many movies are not available on HD DVD. Disks are more expensive than DVD and previewed disks (i.e. cheap) are not (yet) available. So -- unless you shoot yourself in the foot and refuse to watch a movie unless it is in HD -- you will be watching lots of DVDs even if you have an HD disk player (either or both formats).

An HDTV will deinterlace (if required) and upscale an incoming 480i or 480p DVD video signal. However, some HDTVs don't do a very good job. Enter upscaling DVD players ... which may do a better job. But, only a good upconverting DVD player is worthwhile. Cheap models (certainly anything under at least $100-$125) just won't beat the video processing in most HDTVs (See the article at the link for a discussion).

HD DVD players (and Blu-ray) make good upconverting DVD players, and depending on what you paid it may be the most cost-effective way to improve the picture on all those DVDs you will still be watching for some time to come (years).

You can test this by comparing a DVD on your HD DVD player and on your present DVD player. Is the picture sufficiently improved on the HD DVD player to perceive a benefit?

If you can benefit from an upconverting DVD player, and the HD DVD player you have is about (or maybe slightly higher than) the price of a good upconverting (non-HD) DVD player (e.g. Oppo 981, $229) consider keeping it. It may help to consider the HD DVD player not as an HD DVD player per se, but as an upconverting DVD player that also plays HD DVDs.

So ... there are some factors to consider. Hope they help.

What is the maximum resolution and (file) formats supported by a dvd player with HDMI output?




xenos mc


If I buy a dvd player or recorder with HDMI output can it play files recorded in High Definition with .wmw or .mkv extensions or I must convert them to .avi (with Xvid or Divx encoder)?
Also I would like to know if files recorded in HD resolution (720 or 1080) can be played by a dvd player. Thanks.



Answer
Plain old DVD (the movie format - not the physical medium) is 480p. An upscaling DVD player using HDMI can stretch that to 1080p, but the picture quality won't be as good as a blu-ray disc, which is recorded in 1080p so no upscaling is required.

If your upscaling player supports other file formats, like Divx, they should definitely support 720p, but I don't know about 1080p. You'll have to check the manual for details on what formats and versions it supports specifically. In this case, the DVD is just a storage medium, so you could put 720p or 1080p video onto the DVD and have the player output it correctly - assuming it supports the file format you wrote the movie to DVD with. Again, check your manual.




Powered by Yahoo! Answers

Selasa, 03 Desember 2013

Why won't the main voices come through on my 5.1 surround sound system?

best upscaling dvd player 1080p on DVPSR510H - SONY DVPSR510H 1080p Upscaling DVD Player
best upscaling dvd player 1080p image



David M


I am setting up my system as follows: Pioneer receiver with Denon upscaling Dvd player with Mitsubishi DLP TV. I am getting surround sounds but not the main talking during DVD playback. I have wired with Dvd- Hdmi to receiver and receiver to TV with Hdmi. Could somebody give a progression of steps to follow to rectify this? Thanks for the help.


Answer
There are many settings you have to check and change to make things work.

On your DVD player, make sure it's set to bitstream the audio to your receiver, and set the video output to the resolution of your TV, whether it's 720p, 1080i, or 1080p.

On your receiver, set the surround mode to auto, meaning it will properly detect and decode whatever audio format is being bitstreamed to it, and make sure to tell the receiver you have a 5.1 speaker setup. Lastly, turn off all DSP modes on your receiver when you are listening to a surround source. DSP modes are a surround EFFECT that can alter the proper mix of your audio, often with a negative outcome.

It wouldn't hurt to make sure your TV's internal speakers are off while you're at it, because that can muddy the audio waters too.

Is it true that DVD players have been downgraded since 2006?




J.O.I.


As a former DVD collector and home theatre salesperson, I remember hearing that in order to sell more Blu-ray and HD-DVD around 2006, all upcoming DVD players' capable resolution would be scaled down from 720p to 480p. The best DVD player I've owned is from 2005 and is capable of 1080i via component video.

Now I tell customers this, that older DVD players were actually better resolution-wise than those that have come since but I'm having trouble finding legitimate sources to back up this claim. I'm not sure how current upscaling players compare, either.

Can you help me find something?



Answer
Keep in mind that DVD video resolution was only at the 480P. DVD players prior to that date never up scaled the video, now they up scale to 720P. Also you can not see the difference between 720P and 1080P in screen smaller than a 46". Most major manufacturer have stopped producing stand alone DVD players due to the Blu Ray disc player can play the DVD and up scale to 1080P if you have a DVD. Also the higher end players will do a better job up scaling than those bargain price unit. They never did down grade the DVD players. You are providing wrong information to the customer. Keep in mind, you get what you pay for. I recommend you read Home Theater Magazine reviews on all products and the pro and con of each technology. Hope this will help you out.




Powered by Yahoo! Answers

Jumat, 04 Oktober 2013

I have a 46" Sony Bravia and the picture is really grainy and pixalated?

best upscaling dvd player 1080p on Sony DVP-SR500H 1080p Upscaling DVD Player from Sony at the Modern 3D ...
best upscaling dvd player 1080p image



idkk


I bought a 46" Sony Bravia and at the store the quality seemed amazing but when I play a DVD with my upscaling dvd player the picture seems to be grainy...no matter what setting that I try..what can I do ?


Answer
So your picture quality depends on a few things:
1) Your TV
2) Your source material [this case your upscaling DVD player]
3) cables

You have a good TV, and the upscaling DVD player probably does 720p or 1080i, which is enough if you only have a 720p set. With 1080p it'd still probably be pretty good.

With that in mind, I believe your problem is the cables. Are you using high definition cables? You'll need either component cables or a HDMI cable. If you're using composite (yellow/red/white) or s-video, you're only getting a standard definition picture sent to your TV.

If you buy a cable, you don't have to get the super expensive ones, just check them out at some place like www.monoprice.com. You can get them for considerably cheaper there, and the quality is almost the same. With expensive in-store cables, more than 50% of the price is the markup. So those $100 cables you see get sold to employees for like $20.

What type of dvd player would work best for a tv that is already a widescreen?




fajita_chi


I am looking to buy a dvd player for my parents and they purchase d a wide screen tv so when you play dvds or watch tv it tends to stretch out the picture. Is there a dvd player that takes this into account or does it matter?


Answer
There is a common misperception that the screen should be full. Not so. While it is nice when it happens only material at the same aspect aratio (width to height ratio) as the screen you are watching will fill the screen ... everything else will have black bars on the top and bottom or the sides (unless the image is stretched or zoomed ... but that distorts or throws away some of the picture).

The director of a film chooses the aspect ratio, and it can vary from 1.33:1 to over 2.7:1 in extreme wideangle films. The most common are 1.78:1 (so called "16:9" -- the aspect ratio of "widescreen" TVs), 1.85:1 and 2.35:1, but others exist too.

See the image at the link to see how these aspect ratios relate on a constant width screen.

TVs often have a control that allows images to be zoomed or stretched to fit the screen ... as stated above this is distortion and most people, after playing with the different settings for a while, return to a straight undistorted image setting.

A widescreen TV will "fit" more programming (particularly if they subscribe to HD programming, which is in widescreen (16:9) format) than their old style TV (Which was 4:3 or 1.33:1 format) BUT they will still see black bars on some movies, particularly on DVD (Note: TV broadcast stations sometimes crop widescreen movies to "fit" the 16:9 screen ... and you can't control this, but the same movie on DVD might have bars).

So ... no, you don't need to buy a different DVD player for widescreen since the basic aspect ratio is determined by the movie, not the player. Maybe the above explanation will help you explain it to your parents.

If buying a DVD player for a 720p or 1080p HDTV, consider a $100-$125 (less expensive ones won't provide any benefit) "upscaling DVD player" (with a HDMI connector) or if you want to go full out, consider the Venture HD DVD player from Walmart ($200) ... which is really a Toshiba HD-A3 player (a good upscaler and it plays HD DVDs).

Hope this helps.




Powered by Yahoo! Answers

Selasa, 13 Agustus 2013

How do standard DVD's look on the Play Stations 2 and 3. Do they upscale the digital format to 1080p?

best upscaling dvd player 1080p on ... BD-F5100 Blu-Ray Disc Player Full HD 1080P | HDMI | DVD | DLNA Network
best upscaling dvd player 1080p image



Love me, h


Is the image better looking than a standard upscaling DVD player?


Answer
PS2 is an older model that was released before the blu-ray came out and does not have upscale capability. You'll have to look at each model and make the comparison. My older blu-ray disc player does a very good job in up scaling to 1080P.

Should I return my recently purchased HD DVD player and buy a much cheaper DVD upconverter instead?




Nick K


Is it worth the money to keep the HD DVD player? Doesn't it do the same function as an upconverter? Please correct me if I am wrong and tell me why it is so much better to have the HD DVD player.


Answer
Depends what you paid for it (and assumes you CAN return it) and what matters to you.

First, consider whether you can really benefit from HD DVD (or Blu-ray which gives identical audio and video quality). Basically you need a moderate to large HDTV .. say 40" or so and preferably 1080p. You also need to watch from a suitable distance (say, 1.5 - 3X screen size. lower number if a 1080p and higher if 720p). You also need an HDMI connection.

As an aside, I have an HD DVD player and don't find a sufficient improvement from HD disks to justify buying them, but I have kept the player for reasons that may become evident as you read on.

There are relatively few HD DVD disks (under 400, and Blu-ray is about the same), and many movies are not available on HD DVD. Disks are more expensive than DVD and previewed disks (i.e. cheap) are not (yet) available. So -- unless you shoot yourself in the foot and refuse to watch a movie unless it is in HD -- you will be watching lots of DVDs even if you have an HD disk player (either or both formats).

An HDTV will deinterlace (if required) and upscale an incoming 480i or 480p DVD video signal. However, some HDTVs don't do a very good job. Enter upscaling DVD players ... which may do a better job. But, only a good upconverting DVD player is worthwhile. Cheap models (certainly anything under at least $100-$125) just won't beat the video processing in most HDTVs (See the article at the link for a discussion).

HD DVD players (and Blu-ray) make good upconverting DVD players, and depending on what you paid it may be the most cost-effective way to improve the picture on all those DVDs you will still be watching for some time to come (years).

You can test this by comparing a DVD on your HD DVD player and on your present DVD player. Is the picture sufficiently improved on the HD DVD player to perceive a benefit?

If you can benefit from an upconverting DVD player, and the HD DVD player you have is about (or maybe slightly higher than) the price of a good upconverting (non-HD) DVD player (e.g. Oppo 981, $229) consider keeping it. It may help to consider the HD DVD player not as an HD DVD player per se, but as an upconverting DVD player that also plays HD DVDs.

So ... there are some factors to consider. Hope they help.




Powered by Yahoo! Answers

Selasa, 30 Juli 2013

How do standard DVD's look on the Play Stations 2 and 3. Do they upscale the digital format to 1080p?

best upscaling dvd player 1080p on Samsung DVD-V9800 DVD/VCR combo Overview & User Reviews ...
best upscaling dvd player 1080p image



Love me, h


Is the image better looking than a standard upscaling DVD player?


Answer
PS2 is an older model that was released before the blu-ray came out and does not have upscale capability. You'll have to look at each model and make the comparison. My older blu-ray disc player does a very good job in up scaling to 1080P.

Should I return my recently purchased HD DVD player and buy a much cheaper DVD upconverter instead?




Nick K


Is it worth the money to keep the HD DVD player? Doesn't it do the same function as an upconverter? Please correct me if I am wrong and tell me why it is so much better to have the HD DVD player.


Answer
Depends what you paid for it (and assumes you CAN return it) and what matters to you.

First, consider whether you can really benefit from HD DVD (or Blu-ray which gives identical audio and video quality). Basically you need a moderate to large HDTV .. say 40" or so and preferably 1080p. You also need to watch from a suitable distance (say, 1.5 - 3X screen size. lower number if a 1080p and higher if 720p). You also need an HDMI connection.

As an aside, I have an HD DVD player and don't find a sufficient improvement from HD disks to justify buying them, but I have kept the player for reasons that may become evident as you read on.

There are relatively few HD DVD disks (under 400, and Blu-ray is about the same), and many movies are not available on HD DVD. Disks are more expensive than DVD and previewed disks (i.e. cheap) are not (yet) available. So -- unless you shoot yourself in the foot and refuse to watch a movie unless it is in HD -- you will be watching lots of DVDs even if you have an HD disk player (either or both formats).

An HDTV will deinterlace (if required) and upscale an incoming 480i or 480p DVD video signal. However, some HDTVs don't do a very good job. Enter upscaling DVD players ... which may do a better job. But, only a good upconverting DVD player is worthwhile. Cheap models (certainly anything under at least $100-$125) just won't beat the video processing in most HDTVs (See the article at the link for a discussion).

HD DVD players (and Blu-ray) make good upconverting DVD players, and depending on what you paid it may be the most cost-effective way to improve the picture on all those DVDs you will still be watching for some time to come (years).

You can test this by comparing a DVD on your HD DVD player and on your present DVD player. Is the picture sufficiently improved on the HD DVD player to perceive a benefit?

If you can benefit from an upconverting DVD player, and the HD DVD player you have is about (or maybe slightly higher than) the price of a good upconverting (non-HD) DVD player (e.g. Oppo 981, $229) consider keeping it. It may help to consider the HD DVD player not as an HD DVD player per se, but as an upconverting DVD player that also plays HD DVDs.

So ... there are some factors to consider. Hope they help.




Powered by Yahoo! Answers

Sabtu, 06 Juli 2013

Why won't the main voices come through on my 5.1 surround sound system?

best upscaling dvd player 1080p on Best Blu Ray Players in India 2013 with prices and features.
best upscaling dvd player 1080p image



David M


I am setting up my system as follows: Pioneer receiver with Denon upscaling Dvd player with Mitsubishi DLP TV. I am getting surround sounds but not the main talking during DVD playback. I have wired with Dvd- Hdmi to receiver and receiver to TV with Hdmi. Could somebody give a progression of steps to follow to rectify this? Thanks for the help.


Answer
There are many settings you have to check and change to make things work.

On your DVD player, make sure it's set to bitstream the audio to your receiver, and set the video output to the resolution of your TV, whether it's 720p, 1080i, or 1080p.

On your receiver, set the surround mode to auto, meaning it will properly detect and decode whatever audio format is being bitstreamed to it, and make sure to tell the receiver you have a 5.1 speaker setup. Lastly, turn off all DSP modes on your receiver when you are listening to a surround source. DSP modes are a surround EFFECT that can alter the proper mix of your audio, often with a negative outcome.

It wouldn't hurt to make sure your TV's internal speakers are off while you're at it, because that can muddy the audio waters too.

Is it true that DVD players have been downgraded since 2006?




J.O.I.


As a former DVD collector and home theatre salesperson, I remember hearing that in order to sell more Blu-ray and HD-DVD around 2006, all upcoming DVD players' capable resolution would be scaled down from 720p to 480p. The best DVD player I've owned is from 2005 and is capable of 1080i via component video.

Now I tell customers this, that older DVD players were actually better resolution-wise than those that have come since but I'm having trouble finding legitimate sources to back up this claim. I'm not sure how current upscaling players compare, either.

Can you help me find something?



Answer
Keep in mind that DVD video resolution was only at the 480P. DVD players prior to that date never up scaled the video, now they up scale to 720P. Also you can not see the difference between 720P and 1080P in screen smaller than a 46". Most major manufacturer have stopped producing stand alone DVD players due to the Blu Ray disc player can play the DVD and up scale to 1080P if you have a DVD. Also the higher end players will do a better job up scaling than those bargain price unit. They never did down grade the DVD players. You are providing wrong information to the customer. Keep in mind, you get what you pay for. I recommend you read Home Theater Magazine reviews on all products and the pro and con of each technology. Hope this will help you out.




Powered by Yahoo! Answers

Rabu, 03 Juli 2013

Is Samsungs BD wise technology in a DVD player just a fancy word for upscaling?

best upscaling dvd player 1080p on Samsung BD-E5900 3D WiFi Blu-ray Disc Player | Best Prices
best upscaling dvd player 1080p image



flitz


Sony has a DVD player that up scales DVDS to 1080p as well......what's the difference?


Answer
yes and no. While it certainly includes upscaling it also sets contrast and colour to "optimize" the picture. Note it works only if both the player and the TV support it. Upscaling DVD players are common (and all BD players upscale DVDs) but they only change resolution (and image quality varies widely depending on the sophistication of the video processor used). See the link for more.

I have a 46" Sony Bravia and the picture is really grainy and pixalated?




idkk


I bought a 46" Sony Bravia and at the store the quality seemed amazing but when I play a DVD with my upscaling dvd player the picture seems to be grainy...no matter what setting that I try..what can I do ?


Answer
So your picture quality depends on a few things:
1) Your TV
2) Your source material [this case your upscaling DVD player]
3) cables

You have a good TV, and the upscaling DVD player probably does 720p or 1080i, which is enough if you only have a 720p set. With 1080p it'd still probably be pretty good.

With that in mind, I believe your problem is the cables. Are you using high definition cables? You'll need either component cables or a HDMI cable. If you're using composite (yellow/red/white) or s-video, you're only getting a standard definition picture sent to your TV.

If you buy a cable, you don't have to get the super expensive ones, just check them out at some place like www.monoprice.com. You can get them for considerably cheaper there, and the quality is almost the same. With expensive in-store cables, more than 50% of the price is the markup. So those $100 cables you see get sold to employees for like $20.




Powered by Yahoo! Answers