Why does my burnt dvd work on the pc but not in a dvd player?

Q.

Answer
The format you put on the DVD is not recognized by your DVD player for your T.V. Use the following below.

Here are the tools I use to copy DVDS for my own personal back ups. I know some folks do not trust some sites due to all the junk spyware out there and virus stuff. But look at my answer history, you will see that I can be trusted. D/load the free protection I recomend. I trust the programs I mention below and use them. I also believe in try before you buy.

http://www.dvdshrink.org/what.html......... - DVD Shrink Freeware will copy most DVDs but there are some it will not copy.

http://www.slysoft.com/?aid=50549.......... - AnyDVD and CloneDVD
These 2 programs are great, 21 day free trial, and I have them both. AnyDVD and CloneDVD they will take off encryption and protection.
Just bought An American Haunting and DVD Shrink would not copy it, but these 2 programs no problem. Have not had any movie yet they could not copy.

FEATURES:
Works automatically in the background
Removes encryption (CSS) and region code (RPC) from DVDs
Removes analogue copy protection (Macrovision)
Removes features such as forced subtitles and warnings
Decrypts without the need to save the data onto your hard-disk
Decrypts 'on the fly'
Prevents automatic launching of 'PC-friendly' software on video DVDs
Allows adjustment of your monitor refresh rate for both NTSC and PAL monitors
Allows execution of external programs on disc insertion and removal
Allows speed control of your DVD drives
Compatible with all DVD media
Works with all DVD-drives, regardless of region code
Works with all DVD copying, such as CloneDVD, and all DVD player software
Works transparently for the operating system: DVDs can be shared over the network and copied with the command prompt or with Windows Explorer, etc.
Proven to be stable and fast and does not require an ASPI driver
Features AnyCDDA: play, copy and rip protected audio CDs

http://www.cdcovers.cc/ - Go here to print out movie covers for your DVD cases

Pc DVD PLAYER NOT OPENING?

Q. I have a dvd in my PC. It was playing just fine a few minutes ago. Just now it won't open PLEASE HELP! What do I do? Please explain throughly! Thanks! :(
If I click the eject button on the DVD player the light turns green and starts making a noise. Like BBMMMMMMMMMMMMMMMMMMMMMMMM. Then it turns off again. If I put the pin in nothing happens and if I go to computer and click eject from there it turns on and starts making nois and turns off again.
It's a HP DVD WRITER DVD630

Answer
On the DVD drive itself there should be a little hole, get a pin and poke it in the hole, this should activate the emergency release and your dvd drive drawer should pop open.

If not, go into 'my computer' and right click on the dvd drive, then click 'eject' to see if that works.

EDIT:
Try using the end of s straightened paper clip and applying more pressure, if it doesn't work with the computer on, try turning the computer off and doing it. It should open a little so that you can open it fully to remove the DVD, though when it closes again it may not open again when you try and open the drive the normal way.

If the disk is jammed or broken inside the drive, access may require the removal of the drive's outer case. If this is necessary, it is very likely that the drive will have to be replaced.

At the moment i am out of ideas, i will edit if i can think of another solution to try

Powered by Yahoo! Answers

My PC DVD player doesn't work...?

TyphoonZX

I have Windows Media player 10, but I cna't play DVDs in my computer...(I think it may have been connected to when I uninstalled Interactual DVD player) If it is, where can I get it again?

Answer
Many times, the DVD software is licensed with the hardware.
If the software is still installed but you removed the DVD player, and installed a different player, the software may not work.
If this is the case, reinstall the older DVD drive along with the newer DVD. If the software detects the old drive hardware in the system, the software should work.
You will have to set the master/slave jumpers properly to get two drives to work on the same cable. One must be set to master, and be at the end of the bus, the other must be set to slave.
If only one drive is in the system, set the jumper to CS cable select. If you get it wrong, the computer may not boot, but will not result in damage.

PC HD vs HD upscaling DVD player?

Nyx

Hiya,

I have a 8800GTS graphics card (HD) connected to my HD TV using a DVI to HDMI cable. I also have a HD upscaling DVD player connected using HDMI. Would there be any difference in the playback quality of the DVD? Do I still need the DVD player?

Sound quality is better though the PC.

Answer
It depends. Which one gives the better output picture. Older models of upscaling DVD player tend to give poorer upscaling results than newer models, but this is not always the case. In your eyes, which gives the better picture? Remember that you can upgrade the computers decoding software to get a better picture.

As the PC sound quality is better, unless the output picture is noticeably poorer, I would use the PC for upscaled DVD output, unless you have a need to quickly load and play a DVD (For instance if the PC takes a while to boot up).

Powered by Yahoo! Answers

My PC DVD player doesn't work...?

TyphoonZX

I have Windows Media player 10, but I cna't play DVDs in my computer...(I think it may have been connected to when I uninstalled Interactual DVD player) If it is, where can I get it again?

Answer
Many times, the DVD software is licensed with the hardware.
If the software is still installed but you removed the DVD player, and installed a different player, the software may not work.
If this is the case, reinstall the older DVD drive along with the newer DVD. If the software detects the old drive hardware in the system, the software should work.
You will have to set the master/slave jumpers properly to get two drives to work on the same cable. One must be set to master, and be at the end of the bus, the other must be set to slave.
If only one drive is in the system, set the jumper to CS cable select. If you get it wrong, the computer may not boot, but will not result in damage.

PC HD vs HD upscaling DVD player?

Nyx

Hiya,

I have a 8800GTS graphics card (HD) connected to my HD TV using a DVI to HDMI cable. I also have a HD upscaling DVD player connected using HDMI. Would there be any difference in the playback quality of the DVD? Do I still need the DVD player?

Sound quality is better though the PC.

Answer
It depends. Which one gives the better output picture. Older models of upscaling DVD player tend to give poorer upscaling results than newer models, but this is not always the case. In your eyes, which gives the better picture? Remember that you can upgrade the computers decoding software to get a better picture.

As the PC sound quality is better, unless the output picture is noticeably poorer, I would use the PC for upscaled DVD output, unless you have a need to quickly load and play a DVD (For instance if the PC takes a while to boot up).

Powered by Yahoo! Answers

where can i get information on using dvd player on pc?

best dvd player on pc image

Q. i was wandering if i have dvd player on my pc can i use it to play a dvd movie.

Answer
If you opened up the attachment that 'man' posted as your first answer. You received malware. Do not open any attachments today.

how can i connect pc and dvd player into auxiliary?

Nata

Ok, so I have a stereo which I usually use my auxiliary on when I watch movies, or want to listen to music from my laptop. Is there anything out there in which i can plug BOTH my dvd player and my pc into the ONE auxiliary port on my stereo? I don't want to keep switching the audio video components whenever I use one or the other.

Answer
get a headphone splitter - so u can plug both ur pc and dvd into the newly bought splitter 0 then plug the back of the splitter into the aux port.

something simple like the ebay item i put the link too should do the trick... just gotta make sure u dont have both on at once otherwise the sound will be distorted.

Powered by Yahoo! Answers

How can you connect dvd player to your PC?

best dvd player on pc image

Up

How can you connect a standalone dvd player to your PC and watch movies?

Answer
You can:

A) Install a TV tuner card which will allow you to not only plug in a DVD player or VHS player, it will also allow you to view TV on the PC as long as you plug in either cable or an antenna.

There are many different ones but here is an example:

http://www.newegg.com/Product/Product.aspx?Item=N82E16815116007

Or

B) You can use a similar USB device, does pretty much the same thing but uses the USB port and you don't have to open the computer

Like this

http://www.newegg.com/Product/Product.aspx?Item=N82E16815116034

But why would you want to??? Doesn't your PC have a DVD drive?, if not you can install one or get an external USB one.

where can i get information on using dvd player on pc?

Q. i was wandering if i have dvd player on my pc can i use it to play a dvd movie.

Answer
If you opened up the attachment that 'man' posted as your first answer. You received malware. Do not open any attachments today.

Powered by Yahoo! Answers