best dvd players for hdtv image
Matty A
I just bought a Philips DVP5990 upconverting dvd player, and i have a sharp 32" 720p hdtv. The player is hooked to the tv via hdmi. What resolution should i set it to? The obvious answer seems to be 720p, but the 480p looks better. Is it something i've done wrong or what? I know its a bit of an awkward question but i could take any help i can get.
Answer
You may have answered your own question.
In theory, as you note, 720p should be best, but there is really no way to predict ... you have to try different settings.
The problem is that there are various video manipulations involved and some scaller/video processor chips do a better job than others.
For example, if you set the DVD player to 480p output, your HDTV upconverts the progressive signal to fit the native resolution of your HDTV (i.e. 720p). If you set the DVD player to 720p or 1080i (for example), the HDTV processes this accordingly. 1080i is converted to 720p and the 720p signal is used direct.
So, depending on the relative quality of the DVD or HDTV scalers/video processors you get better or worse results.
That said, you don't say what connection type you are using and that can matter. Ideally upconverting DVD players should be connected via HDMI since on some models component is only outputting 480p, not 720p or higher, despite menu settings. And you can't get anything higher than 480 from composite or S-video.
If you are connected via HDMI, and 480p output works best in means the processor in the TV is better than that in the DVD player (and essentially you wasted your money .... not uncommon since budget upconverters rarely work well). On the other hand, if you are connected via component, composite or S-video try HDMI (you don't need to spend more than $10-$15 for a cable ... expensive HDMI cables are a rip-off).
Hope that helps.
You may have answered your own question.
In theory, as you note, 720p should be best, but there is really no way to predict ... you have to try different settings.
The problem is that there are various video manipulations involved and some scaller/video processor chips do a better job than others.
For example, if you set the DVD player to 480p output, your HDTV upconverts the progressive signal to fit the native resolution of your HDTV (i.e. 720p). If you set the DVD player to 720p or 1080i (for example), the HDTV processes this accordingly. 1080i is converted to 720p and the 720p signal is used direct.
So, depending on the relative quality of the DVD or HDTV scalers/video processors you get better or worse results.
That said, you don't say what connection type you are using and that can matter. Ideally upconverting DVD players should be connected via HDMI since on some models component is only outputting 480p, not 720p or higher, despite menu settings. And you can't get anything higher than 480 from composite or S-video.
If you are connected via HDMI, and 480p output works best in means the processor in the TV is better than that in the DVD player (and essentially you wasted your money .... not uncommon since budget upconverters rarely work well). On the other hand, if you are connected via component, composite or S-video try HDMI (you don't need to spend more than $10-$15 for a cable ... expensive HDMI cables are a rip-off).
Hope that helps.
besides the picture quality, can my old dvd player work with the new 1080p HDTV?
Eric C
i am getting a new 1080p hdtv but don't feel like spending another few hundred bux for a upconverting dvd, for now.
can the old dvd player work with hdtv? do i need to buy any connect wire?
Answer
Absolutely! Use the best connection you can so you get the best possible picture. If your DVD player has an HDMI port, use that. Otherwise use the component cables (red, gree, blue for video + red and white for audio). If not that, try S-Video. And lastly, if not that, use the yellow, red and white component cables.
Absolutely! Use the best connection you can so you get the best possible picture. If your DVD player has an HDMI port, use that. Otherwise use the component cables (red, gree, blue for video + red and white for audio). If not that, try S-Video. And lastly, if not that, use the yellow, red and white component cables.
Powered by Yahoo! Answers
Title Post: What resolution should i set my upconverting dvd player to?
Rating: 100% based on 9998 ratings. 5 user reviews.
Author: Unknown
Thanks For Coming To My Blog
Rating: 100% based on 9998 ratings. 5 user reviews.
Author: Unknown
Thanks For Coming To My Blog
Tidak ada komentar:
Posting Komentar