stumesa
i have a dvd recorder that i can transfer vcr tapes to my dvd player, how do i do that?
Answer
All you have to do is VCR outputs (composite/Yellow and audio/red & white jacks) to the corresponding inputs on the recorder. Hit play,VHS...hit record, dvd recorder and you're done. Stop the DVD recorder and put in new blank dics. Repeat as necessary.
Many dvd recorders allow you to make a basic main menu if you want to break up the dvd into accessible parts. Also be aware that you can get more onto a DVD by varying the record mode on your recorder. But, more on a disc means lower quality. You should also make sure you buy the right blank discs for your brand of recorder. Most handle DVD-Rs but a few brands use DVD+Rs. Check your manual. The patch cables for dubbing can be purchased at your local Radio Shack...you'll need "RCA to RCA".
hope that helps!!!
All you have to do is VCR outputs (composite/Yellow and audio/red & white jacks) to the corresponding inputs on the recorder. Hit play,VHS...hit record, dvd recorder and you're done. Stop the DVD recorder and put in new blank dics. Repeat as necessary.
Many dvd recorders allow you to make a basic main menu if you want to break up the dvd into accessible parts. Also be aware that you can get more onto a DVD by varying the record mode on your recorder. But, more on a disc means lower quality. You should also make sure you buy the right blank discs for your brand of recorder. Most handle DVD-Rs but a few brands use DVD+Rs. Check your manual. The patch cables for dubbing can be purchased at your local Radio Shack...you'll need "RCA to RCA".
hope that helps!!!
I just got a blu ray dvd player for my hdtv, I've been using a dvd/vcr combo to connect to the cable ?
Erica B
I would change channels through the vcr. How do I set up my new blu ray dvd player to get cable?
Answer
If you're using the DVD/VCR to change channels, leave it connected to your TV. Instead, connect the blu-ray player to your HDTV with a HDMI cable. You want to use a HDMI cable because it's the only way to get the full HD quality picture out of your blu-ray player.
The blu-ray player does not have a TV tuner in it, so it can't be used with your cable service at all.
If your TV doesn't have enough HDMI ports, you can either swap your DVD/VCR to using component video cables, or get a HDMI switch.
Using component video for the DVD/VCR is OK even for HDTV because most channels are in 720p, which is handled fine by component video cables. However, blu-ray movies are in 1080p, which can only be carried by a HDMI cable.
If you're using the DVD/VCR to change channels, leave it connected to your TV. Instead, connect the blu-ray player to your HDTV with a HDMI cable. You want to use a HDMI cable because it's the only way to get the full HD quality picture out of your blu-ray player.
The blu-ray player does not have a TV tuner in it, so it can't be used with your cable service at all.
If your TV doesn't have enough HDMI ports, you can either swap your DVD/VCR to using component video cables, or get a HDMI switch.
Using component video for the DVD/VCR is OK even for HDTV because most channels are in 720p, which is handled fine by component video cables. However, blu-ray movies are in 1080p, which can only be carried by a HDMI cable.
Powered by Yahoo! Answers
Title Post: how do u transfer vcr tapes on to dvd player with a dvd recorder/or vcrdvd combo?
Rating: 100% based on 9998 ratings. 5 user reviews.
Author: Unknown
Thanks For Coming To My Blog
Rating: 100% based on 9998 ratings. 5 user reviews.
Author: Unknown
Thanks For Coming To My Blog
Tidak ada komentar:
Posting Komentar